Maharashtra has one of the densest concentrations of healthcare, pharmaceutical, biotechnology and food-processing facilities in India. From the hospital clusters of Mumbai and Thane to the pharma corridors of Pune, Aurangabad and Nashik, and the growing diagnostics networks in Nagpur and Kolhapur, reliable steam sterilization is a daily operational necessity. Our vertical autoclaves are engineered to meet that demand — with pressure vessels fabricated from SS 304 and SS 316 stainless steel, precision-machined seams and imported safety valves that deliver repeatable sterilization cycles year after year.
Whether you are equipping a new ICU block in Navi Mumbai, upgrading a microbiology laboratory in Pune, commissioning a cleanroom autoclave in a pharma plant near Chhatrapati Sambhajinagar, or setting up a diagnostic centre in Nashik, our team helps you match chamber capacity, automation level and safety configuration to your actual workload — not to a generic specification sheet.
Vertical autoclaves rely on saturated steam under pressure — the most dependable and widely validated method for destroying microorganisms on heat-resistant instruments and laboratory materials.
When saturated steam meets a cooler surface, it condenses and releases a large amount of latent heat. That heat rapidly raises the temperature of the load and denatures microbial proteins, resulting in sterilization. For this to work reliably, air must be completely removed from the chamber — trapped air creates cold pockets where sterilization fails.
The pressure–temperature relationship is fixed by physics: at 15 PSI saturated steam reaches approximately 121°C, while at 30 PSI it reaches about 134°C. The autoclaves we supply across Maharashtra control these parameters through calibrated pressure gauges, PID controllers and spring-loaded safety valves.
Different facilities need different levels of automation, insulation and corrosion resistance. Here are the main configurations we build and supply.
A straightforward, budget-friendly unit with one chamber wall. Well suited to small clinics, dispensaries and low-volume laboratories in Maharashtra.
A PUF-insulated outer jacket holds heat inside the chamber, cutting heat-up time and electricity usage — a practical choice for high-throughput labs.
Separate valves for steam inlet, air exhaust and condensate drain give cleaner steam and better air removal — essential for microbiology and media preparation.
PLC and HMI touchscreen control with stored programs, alarm history, batch printing and USB data export for regulated and audit-driven environments.
SS 316 contact surfaces resist corrosion and cleaning chemicals, making these units suitable for GMP cleanrooms and injectable manufacturing lines.
Non-standard chamber dimensions, higher pressure ratings, special voltage configurations or bespoke baskets and trolleys built to your requirement.
Select the model that matches your load profile, available floor space and documentation requirements — every unit is tested before dispatch to your Maharashtra site.
Popular Choice
A dependable daily-use unit for clinics, diagnostic centres and small hospitals. Manual lid locking combined with automatic pressure regulation and digital temperature readout.
High Performance
A steam stock sterilizer with three independent valves for steam inlet, air exhaust and condensate drainage — the preferred design for culture media and microbiological work.
Fully Automatic
PLC and HMI controlled with programmable cycles, printer output and cycle data logging — built for pharmaceutical plants and validation-driven laboratories.
Energy Efficient
PUF-insulated double-wall construction traps heat inside the chamber, shortening cycle time and lowering power bills — ideal for laboratories running multiple batches per day.
Pharma Grade
Corrosion-resistant SS 316 chamber and wetted parts designed for pharmaceutical, biotech and cleanroom sterilization where GMP compliance is mandatory.
Custom Built
Need a non-standard chamber size, a higher pressure rating or a specific basket layout? We build fully customised vertical autoclaves against your drawings.
The reliability of a vertical autoclave depends on the quality of every individual component. Here is what goes into the units we supply to Maharashtra.
Each unit is hydro-tested, safety-validated and cycle-tested before it leaves the works and is dispatched to your Maharashtra address.
A spring-loaded safety valve, an independent pressure release path and a low-water cut-off work together to protect both the operator and the vessel.
A digital PID controller maintains 121°C or 134°C with minimal fluctuation so every cycle achieves the required lethality.
PLC and HMI touchscreen control with stored recipes, alarm logging, batch printing and USB data export for regulated facilities.
SS 304 or SS 316 pressure vessels with argon-welded seams and polished interiors that resist corrosion and clean down easily.
Automatic water level sensing switches off the heater when water drops below the safe limit, preventing element burnout.
A multi-point radial locking system with a mechanical interlock ensures the lid cannot be opened while the chamber is pressurised.
PUF-insulated double-walled construction retains heat, cutting cycle time and reducing electricity consumption by up to 30%.
Front-accessible components, standardised spares and a modular heating element keep servicing quick and economical anywhere in Maharashtra.
Standard parameters of the vertical autoclaves we supply across Maharashtra. Custom pressure ratings, voltages and chamber sizes are available on request.
| Parameter | 20 L – 35 L | 50 L – 75 L | 100 L – 200 L |
|---|---|---|---|
| Chamber Material | SS 304 / SS 316 | SS 304 / SS 316 | SS 304 / SS 316 |
| Construction | Single / Double Wall | Double Wall PUF Insulated | Double Wall PUF Insulated |
| Working Pressure | 15–20 PSI | 15–20 PSI | 15–22 PSI |
| Working Temperature | 121°C – 134°C | 121°C – 134°C | 121°C – 134°C |
| Sterilization Time | 20 – 40 Minutes | 30 – 50 Minutes | 40 – 60 Minutes |
| Control Type | Semi / Fully Automatic | Semi / Fully Automatic | Fully Automatic / PLC |
| Heating Element | 2 kW – 3 kW | 4 kW – 6 kW | 6 kW – 12 kW |
| Power Supply | 220 V / 50 Hz Single Phase | 220 V / 440 V | 440 V / 50 Hz Three Phase |
| Safety Features | Safety Valve, Pressure Gauge, Low Water Cut-Off | Triple Valve, Interlock, Low Water Cut-Off | Triple Valve, PLC Alarms, Interlock |
| Warranty | 12 Months | 12 Months | 12 Months |
Vertical autoclaves occupy less space, cost less to install and suit a wide range of workloads — which is why they are so widely used across Maharashtra's hospitals and labs.
Top-loading design uses minimal floor area — valuable in Mumbai and Pune where laboratory space is at a premium.
Entry cost and installation requirements are significantly lower than comparable horizontal autoclaves.
Smaller chamber volume reaches sterilization temperature faster, improving turnaround between batches.
Lower water requirement per cycle reduces operating cost, especially in areas with limited supply.
Radial locking with interlock prevents accidental opening while the chamber is still under pressure.
Straightforward construction and accessible parts keep maintenance time and cost to a minimum.
Both designs sterilize effectively — the right choice depends on your throughput, available space and loading method. Here is a side-by-side comparison.
| Feature | Vertical Autoclave | Horizontal Autoclave |
|---|---|---|
| Loading Method | Top loading | Front loading |
| Floor Space | Compact footprint | Occupies more floor area |
| Capacity Range | 20 L – 200 L | 50 L – 1000 L+ |
| Initial Cost | Lower | Higher |
| Cycle Time | Faster for small and medium loads | Longer, but handles bulk loads |
| Best Suited To | Clinics, diagnostic labs, small and mid-size hospitals | Large hospitals, pharma production lines |
| Installation | Simple, minimal site work | Requires more preparation |
Maharashtra's economy spans healthcare, pharmaceuticals, biotechnology, food processing and heavy industry. Our vertical autoclaves serve sterilization needs across all of them.
Sterilization of surgical instruments, OT kits, dressings, linen and reusable medical devices.
Media preparation, glassware sterilization, culture handling and biohazard waste treatment.
GMP-compliant sterilization of components, containers, equipment and cleanroom garments.
Microbiology, biotechnology and life-science laboratories requiring repeatable sterilization.
Sterilization of packaging, utensils and processing equipment for hygiene and shelf-life compliance.
Safe decontamination of laboratory and hospital waste before disposal as per BMW Rules.
Sterilization of veterinary surgical instruments, dairy equipment and animal care tools.
Quality-control and microbiology testing labs in manufacturing and processing industries.
A disciplined, stage-by-stage workflow ensures that every autoclave dispatched to Maharashtra meets the performance and safety standards we commit to.
We review your load type, batch size, space, power supply and documentation needs before proposing a configuration.
Engineering drawings are prepared for the chamber, jacket, piping, controls and safety layout.
Certified SS 304 / SS 316 sheets and plates are sourced from approved suppliers with test certificates.
Precision cutting, rolling and argon welding produce leak-proof, distortion-free pressure vessels.
Each vessel is hydro-tested at 1.5× working pressure to confirm structural integrity.
Heaters, controllers, valves, gauges, insulation and safety systems are fitted and wired.
A live sterilization cycle is run with temperature verification and safety trip checks.
Careful packing, transport to your Maharashtra site, on-site installation and operator training.
More than a decade of manufacturing experience, in-house fabrication capability and a responsive service approach make us a dependable long-term partner.
Our vertical autoclaves are built to ISI and CE requirements, with documented testing at every production stage.
Fabrication, assembly and testing happen in-house, giving us full control over quality and delivery timelines.
Buying directly from the manufacturer removes middlemen and keeps pricing transparent for Maharashtra buyers.
Established transport partners ensure safe, timely dispatch to Mumbai, Pune, Nagpur, Nashik and beyond.
Telephone and remote troubleshooting, quick spare parts dispatch and AMC options keep downtime low.
Non-standard chambers, higher pressure ratings, special baskets and custom automation built to order.
On-site guidance for your technical staff on safe operation, cycle setting and preventive maintenance.
Test certificates, operating manuals, warranty documents and IQ/OQ/PQ support for regulated facilities.
Choosing correctly the first time saves money and avoids operational problems later. Work through these eight parameters before placing an order.
Estimate the total volume of instruments, glassware or media you sterilize per batch to fix the chamber size.
SS 304 is adequate for general use; SS 316 is recommended for pharma, corrosive loads and frequent chemical cleaning.
Semi-automatic suits basic clinical use; PLC-based fully automatic units suit validation and audit requirements.
Confirm the unit reaches 121°C at 15 PSI or 134°C at 30 PSI as required by your sterilization protocol.
Insist on a safety valve, low-water cut-off, pressure gauge and lid interlock as minimum requirements.
Prefer ISI, CE or ISO certified equipment so quality is independently verified, not self-declared.
Check spare parts availability, warranty terms and how quickly a service engineer can reach your site.
Factor in power consumption, water use, spares and maintenance — not just the purchase price.
A disciplined maintenance routine protects your investment and keeps sterilization results consistent cycle after cycle.
⚠️ Safety Note: Never attempt to open the autoclave while the pressure gauge shows residual pressure. Always follow the operating manual and ensure operators are trained on safe use and emergency procedures.
Our vertical autoclaves are built to recognised national and international standards so that your quality and safety audits pass without last-minute scrambling.
Manufactured in line with Indian Standards for sterilization equipment, covering construction and safety.
Meets applicable European health, safety and environmental requirements for global acceptance.
Manufacturing practices aligned with medical device quality management system principles.
SS 316 models with polished surfaces and documentation support suited to pharmaceutical validation.
Vertical autoclave pricing in Maharashtra generally ranges from about ₹45,000 for a 20-litre semi-automatic unit to around ₹4,50,000 for a 200-litre fully automatic triple valve model. Here is what drives the number.
| Factor | Impact on Price |
|---|---|
| Chamber Capacity | Higher litre capacity requires more material and larger heaters, raising cost |
| Material Grade | SS 304 is standard; SS 316 typically adds a 15–25% premium |
| Wall Construction | Double-walled PUF-insulated bodies cost more than single-walled units |
| Automation Level | PLC and HMI control with data logging adds a significant premium |
| Safety Configuration | Triple valve systems, interlocks and low-water cut-off increase cost |
| Accessories | Extra baskets, trolleys, printers and data loggers are priced separately |
| Certification & Documentation | ISI, CE and IQ/OQ/PQ documentation packages may add to the base price |
| Freight & Installation | Transport to your Maharashtra location plus on-site installation and training |
Share your capacity, material and automation requirement and we will send a written quotation with freight and installation clearly itemised.
GS Enterprises is a professional Vertical Autoclave Manufacturer in Maharashtra offering vertical autoclave manufacturing, supply, installation, testing, commissioning and maintenance support. Our vertical autoclaves are engineered for hospitals, multi-speciality clinics, pathology and diagnostic laboratories, pharmaceutical manufacturing units, biotechnology companies, research institutes, veterinary facilities, food processing plants and industrial quality-control laboratories across the state.
As a dependable Vertical Autoclave Supplier in Maharashtra, we recognise that sterilization requirements differ significantly from one facility to another. Before recommending a model, our team evaluates chamber capacity, working pressure and temperature, material of construction, automation level, available installation space, power supply arrangement, water quality and the specific application. This ensures the unit you receive is genuinely suited to your workload rather than being a generic off-the-shelf choice.
Maharashtra is one of India's leading industrial and healthcare states, with dense clusters of hospitals, pharmaceutical plants, biotechnology firms, food processing units, educational institutions and research organisations. Our vertical autoclave solutions in Maharashtra are planned around these real-world applications, with configurations that can include stainless steel chambers, double-walled insulated bodies, triple valve steam control, digital or PLC-based controls, safety interlocks and low-water protection.
Alongside Mumbai, Pune and Nagpur, we regularly support facilities in Thane, Navi Mumbai, Nashik, Chhatrapati Sambhajinagar, Kolhapur, Solapur, Amravati, Ahmednagar, Latur, Nanded, Panvel, Bhiwandi, Palghar and the industrial belts around Boisar, Tarapur and Roha. Our team assists with equipment selection, site readiness checks, installation planning, commissioning, operator guidance, spare parts and ongoing maintenance support.
For pharmaceutical manufacturers, multi-speciality hospitals, diagnostic chains, educational institutions, veterinary hospitals and industrial testing laboratories, we can review your sterilization protocol and recommend a suitable vertical autoclave configuration. Equipment can be planned around the required capacity, operating conditions, available floor space, automation level, documentation needs and safety requirements.
If your city or industrial area is not listed above, you can still contact us with your project location and sterilization requirement. We will confirm supply, freight and installation feasibility for locations across Maharashtra and other major cities in India.
Contact GS Enterprises to discuss your requirement for Vertical Autoclave Manufacturer in Maharashtra services, including manufacturing, supply, installation, commissioning, operator training, spare parts and annual maintenance support.
Hospitals, diagnostic chains and pharmaceutical manufacturers across Maharashtra rely on GS Enterprises for their sterilization equipment requirements.
We installed a 75 L triple valve vertical autoclave at our pathology laboratory in Pune. The fabrication quality is impressive and the sterilization cycle repeats accurately every time. Installation and staff training were handled smoothly.
We compared several vertical autoclave suppliers before finalising GS Enterprises. The quotation was clear, dispatch to our Mumbai facility was on schedule, and spare parts support has been prompt whenever we have needed it.
We ordered SS 316 fully automatic vertical autoclaves for our pharmaceutical plant near Chhatrapati Sambhajinagar. The PLC controls, data logging and documentation package made our validation and audit process considerably easier.
Common questions about vertical autoclave supply, pricing, delivery, installation and after-sales support in Maharashtra.
GS Enterprises is among the most trusted vertical autoclave manufacturers supplying Maharashtra. We build ISI and CE certified vertical steam sterilizers in capacities from 20 litres to 200 litres, in semi-automatic, fully automatic and triple valve versions, and supply them to hospitals, diagnostic laboratories, pharmaceutical plants and research institutes in Mumbai, Pune, Nagpur, Nashik, Thane, Chhatrapati Sambhajinagar and other Maharashtra cities.
A vertical autoclave in Maharashtra typically starts at around ₹45,000 for a 20–25 litre semi-automatic single-walled unit and can go up to ₹4,50,000 for a 150–200 litre fully automatic triple valve model. The final price depends on chamber capacity, SS 304 or SS 316 construction, automation level, accessories, freight to your Maharashtra location and any customisation requested.
Yes. We regularly dispatch vertical autoclaves to Mumbai, Navi Mumbai, Thane, Pune, Pimpri-Chinchwad, Nashik, Nagpur, Chhatrapati Sambhajinagar, Kolhapur, Solapur and Amravati, along with other Maharashtra locations. Delivery is handled through reliable transport partners, and our service engineers travel to site for installation, commissioning and operator training.
Standard capacities available to Maharashtra customers are 20 L, 25 L, 35 L, 50 L, 75 L, 100 L, 150 L and 200 litres. Larger or non-standard chambers, double-walled PUF-insulated bodies and custom stainless steel baskets or trolleys can also be manufactured against a specific requirement.
Our vertical autoclaves are used by multi-speciality hospitals and clinics, pathology and diagnostic laboratories, pharmaceutical and biotechnology manufacturing units, Ayurvedic and food processing plants, veterinary hospitals, educational and research institutes, and industrial quality-control laboratories throughout Maharashtra.
Every vertical autoclave supplied to Maharashtra carries a 12-month warranty against manufacturing defects. We provide installation and commissioning support, on-site operator training, telephone and remote troubleshooting, genuine spare parts dispatch and annual maintenance contract options for Maharashtra customers.
A typical sterilization cycle takes 30 to 60 minutes including heat-up, sterilization hold and cooling. The exact duration depends on chamber capacity, load type and density, and the selected sterilization temperature (121°C or 134°C).
Absolutely. We build custom vertical autoclaves with non-standard chamber sizes, higher pressure ratings, special baskets or trolleys, alternative voltage configurations and advanced PLC automation. Share your requirement and site details with our team for a tailored quotation including freight and installation.
Works: BC-68, Sector-3, DSIIDC, Bawana Industrial Area, Manesar, Haryana – 122051
Regd. Office: Block G-7/400, 4th Floor, Sector-16, Rohini, New Delhi – 110089
gs.inst2010@gmail.com
+91 85888 85249
